Print Page   |   Contact Us   |   Sign In   |   Join
IAEI Magazine
Blog Home All Blogs
Search all posts for:   

 

View all (1101) posts »
 

Renewable, Reliable, and Abundant Wind Energy — The Future is Here and Now!

Posted By Jonathan Cadd, Saturday, May 01, 2010
Updated: Wednesday, January 23, 2013

Imagine, if you will, a nation powered by a renewable, reliable, abundant, and virtually silent source of fuel that can be converted readily and efficiently to supply an ever-increasing demand for electricity. Imagine a source of fuel that will lessen the demands for fossil fuels, the threat of depleting the ozone and the global concern over ever-increasing carbon footprints. Not to mention a source of fuel that produces no pollution and is projected to save 4 trillion gallons of water in the U.S. alone by the year 2030. "Kryptonite?” you ask. Not quite, the source is here in our galaxy and right in our own backyards.

This source of fuel has been a constant companion to man and has been around in vast supply since before the time of the pyramids, cooling us down as the days end and on hot summer nights, and causing the mighty eagle to soar; it is the wind. The technology for harnessing the wind and converting it to clean quiet energy in abundance is here now and here to stay; no longer is it what many have believed to be something that the future holds in store when, or if, current technology can be developed to harness it.

In this article, the reader will take a look at the history of harnessing the wind for production of electricity, what its impact is currently, and how this renewable resource has been quickly shaping our future of late.

We will also look at the new Article 694 in the 2011National Electrical Codeand at how theNEChas risen to the challenge of addressing this newly improved technology and at the growing use ofsmall wind (turbine) electric systemsin single- and multi-family dwellings.

 


Photo 1. Several of today’s modern wind-produced generating facilities are implementing new and innovative ways of capturing even the slightest breeze to generate electricity.

 

Where It All Began

Let’s start with some of the known facts and history of wind generation and how many manufacturers, like GE Energy, Siemens, Mitsubishi, Acciona WP, Nordex and many others, along with groups like the American Wind Energy Association (AWEA) are striving to bring this technology into the mainstream of the production of electricity. We will see as we journey through this history that we are well on the way to ensuring that this abundant source of fuel becomes an everyday household source of generating and supplying electricity to many homes and to an energy-thirsty nation.1

Although wind energy, much like photovoltaics (solar energy), started to make its appearance back in the 1970s as an alternative renewable energy source, fossil fuel had already been crowned the king and many markets and industry itself, here in the United States and around the globe, were built around it. These industries and markets not only rely on the supply of fossil fuel, but many of the modern conveniences that we daily rely on depend on the supply of these fuels, modern plastics being just one of the many industries.

With fossil fuel in abundant supply and with much of the nation’s power production relying on the vast stores of coal, natural gas, and oil, renewable energy sources such as wind were being developed by many utility companies but with only moderate hopes of those sources ever really taking hold and becoming real players in the commercial production of electricity as we know it.2

Even today many modern modes of transportation, whether it be the automobile, airplane, bus or train, and most forms of public transportation are heavily reliant on fossil fuels; although we are now beginning to turn the corner, and are seeing many forms of transportation including many public means of transportation that are converting to electric power. With this rapid change on the forefront, the growing demand for electricity will surely increase exponentially, and harnessing the wind will help to secure an abundant, renewable, and highly reliable source of electricity now and in the future.

 


Photo 2. Many years of engineering and research have now shown us that large towers and variable pitch blades are necessary to reach up and capture the wind where it is likely to be constant and measurable.

 

Leading the Way

Currently, the United States is the world leader in wind power with over 35,000 megawatts of installed and operating capacity. Thirty-six states have committed to this new technology — Alaska, Arizona, California, Colorado, Delaware, Hawaii, Idaho, Iowa, Illinois, Indiana, Kansas, Maine, Massachusetts, Michigan, Minnesota, Missouri, Montana, Nebraska, New Hampshire, New Mexico, New York, New Jersey, North Dakota, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Dakota, Tennessee, Texas, Utah, Vermont, Washington, West Virginia, Wisconsin, and Wyoming — with many others planning to implement wind production facilities and developing infrastructure to receive the electricity from this newly installed technology.3

In the state of Texas, over 5000 megawatts of energy production has been installed in the rural area surrounding the city of Sweetwater alone, with plans to install even bigger production facilities known aswind farmsthroughout the state. Currently the overall wind production within the state is a staggering 9,410 megawatts. Iowa is second in wind production capacity with 3,670 megawatts of power generation, and California is third with a wind production capacity of 2,794 megawatts of power generating capacity. Almost half of the wind production capacity in the U.S. resides in these three states, with the potential of much more to be developed and installed in the years to come, in not only these states but in many of the states that were aforementioned.3

 


Photo 3. The reader can see the size and the shear enormity of a portion of the tower section of a modern wind-driven generator by simply comparing it to the flag truck that will accompany it to its final destination.

 

Looking at the Numbers

To get a feeling for how this renewable resource has made its stand on the energy production stage here in the U.S., let’s look at the numbers. In 2009 alone, 9,922 megawatts were installed nationally, bringing the total U.S wind capacity to 35,129 megawatts by the end of 2009. Currently in the state of Texas alone, several wind farms of the same or greater capacity than currently exists (9,410 megawatts) within the state are being installed.3

With the support through many government agencies like the US Department of Energy, the Green Building Council and many others, plans are on the drawing board and wind energy has been slated to double its production from its current rate in the next three years.4

Currently around 25% of all wind production facilities are utility owned with many of these facilities being either community owned or part of a cooperative energy producing facility supplying many cities and towns.5 A major benefit is that once a wind farm is installed the electricity generated is inflation-proof and can provide long-term benefits over fuel pricing volatility, something that as a consumer each and every one of us has experienced over the years.

With 42% of all new facilities generating electricity being wind, the production of wind farms has been second only to natural gas for the fourth year in a row.


Photo 4. With these mammoth electricity-producing giants becoming almost commonplace in today’s modern wind farms, installers have all but perfected the methods of erecting them, which cuts down on the time it takes to put them into production. Photo by Randy Hunter.

The New NEC-2011, Article 694. Small Wind Electric Systems

Now that we have looked at wind production facilities for electricity and their history, along with what exists currently, let’s see how the electrical industry has responded and developed guidelines for the safe installation and inspection of this growing technology. InNEC-2011 a new article has been developed for this industry and is currently titled "Small Wind Electric Systems.” As this industry has grown as a global production means of supplying commercially distributed power, so the industry has grown within many communities as a way to supplement current daily electrical demands for homes. Many smaller systems are available and are being used to supply power to single-family residences in the same way that photovoltaic systems and others are being used currently.

As we look at some of theNECrequirements of these systems, the first thing we are made aware of by the scope of Article 694 is that this article applies to "small wind (turbine) electric systems” and provides installation and inspection requirements for systems up to and including 100 kW. Informational notes which have been renamed as such from the previous fine print notes inNEC-2008 tell us that these "small wind (turbine) electric systems” can be "interactive systems” or "stand-alone systems” much like the photovoltaic systems described in Article 690.

Interactive or Stand-Alone Systems

Many of these systems are utility interactive, some are currently being used to augment existing photovoltaic systems and many are stand-alone systems. Many of these systems include battery storage for the excess energy produced for future use or for use when periods of no wind are experienced. Of note to the reader, these systems, whether they be interactive or stand-alone, is that 694.2 indicates that therated power(see definition ofrated powerin 694.2, Definitions) output of these small wind (turbine) electric systems is generally measured at a wind speed of 11.0 m/s (or 26.4 mph). If a system contains a turbine that produces more power at a lower wind speed, the rated power would then be measured at a wind speed less than 11 m/s that produces the greatest output power. This method for measuring wind turbine power output, or rated power is extracted from the IEC Standard 61400-12-1,Power Performance Measurements of Electricity Producing Wind Turbines.

Also note that themaximum output power(see definition ofrated powerin 694.2, Definitions) is identified in 694.2 as "The maximum one-minute average power output a wind turbine would produce during normal steady-state operation (instantaneous power output could actually be higher in some cases).

As is many times the case in Chapter 6, Special Equipment, Section 694.3 tells the installer and the inspector that in those cases where the requirements of other articles of thisCodeand Article 694 may differ, the actual requirements of Article 694 will apply; and if the small wind (turbine) electric system is operated in parallel with primary sources of electricity, that the requirements in Article 705, Interconnected Electric Power Production Sources, will then apply. The reader should also note here that as an exception to 694.3 a "Small wind electric system, its equipment, or its wiring method where installed in a hazardous (classified) location, would need to comply with all of the applicable Coderequirements in Articles 500 through 516, respectively.”

 


Photo 5. As the modern wind farms are becoming more and more prevalent, the old pump jack platforms that once covered the landscape of many oil production and natural gas facilities are continuing to vanish, giving way to renewable, reliable and abundant wind energy!

 

Surge Protection

When installing a small wind electric system, another important factor comes into play and is addressed in 694.4(D) for surge protection. A surge protective device is required to be installed between small wind electric systems and any loads that are served by the premises electrical system. These surge protective devices are permitted to be a Type 3 device that is located on a dedicated branch circuit that serves the small wind electric system; the surge protection device can also be a Type 2 device located anywhere on the load side of the service disconnect. In addition, these surge protective devices are required to be installed in accordance with Article 285, Part II.

Conductor Ampacity and Overcurrent Protection

It’s also important to note that when sizing these systems for ampacity of the conductors and the overcurrent protective device ratings, the current derived from the small wind electric system is considered to be continuous as indicated in 694.8(B)(1), much like a photovoltaic system. Circuit conductors and overcurrent devices are required to be sized to carry not less than 125 percent of the maximum currents as calculated in 694.8(A). The rating or setting of overcurrent devices is permitted in accordance with 240.4(B) and (C).

Disconnecting the Small Wind Electric System

As we look at Part III of the new Article 694, we see the requirements for disconnecting means of the small wind electric system that are located in 694.13 which tell us that a means to disconnect all of the current-carrying conductors from the small wind electric system from all of the other conductors in a building or other structure is necessary. Section 694.13 also indicates that a switch, circuit breaker, or other device, either ac or dc, is not be installed in a grounded conductor if the operation of that switch, circuit breaker, or other device leaves the marked, grounded conductor in an ungrounded and energized state. Note the exception to 694.13, that indicates that a wind turbine that incorporates and uses a turbine output circuit for regulating does not require a disconnecting means for the output circuit. Also note that additional requirements for disconnecting means are located in 694.14(A) through (D), along with requirements for disconnecting the equipment associated with the small wind electric system located at 694.15.

Wiring and Grounding the System

Part IV of Article 694 lays out the requirements for the wiring methods of these new small wind electric system. Section 694.31(A) allows the use of any wiring method located in theNECas well as those wiring methods that are specifically listed for use with these systems, with the stipulation that turbine output circuits operating at maximum voltages that exceed 30 volts need to be installed in readily accessible locations. These circuit conductors are required to be installed in raceways. Also note that the grounding of these systems as indicated in 694.43(A) for exposed non-current-carrying parts is required to be done in accordance with Section 250.134.These metal parts, like turbine blades as well as tails, are not required to be grounded as they typically have no source that might energize them.

Identifying the Source

Wind energy has been slated to double its production from its current rate in the next three years.

When a structure or building has a stand-alone system that is not connected to a utility service source, 694.56(A) requires a permanent plaque or directory to be installed on the exterior of the building or structure at a readily visible location, indicating this as well as the location of the disconnecting means if applicable.

If a facility employs both utility service and a small wind electric system, 694.56(B) requires a permanent plaque or a directory that provides the location of the service disconnecting means and the small wind electric system disconnecting means.

Storing What We Produce

As we near the end of Article 694, let’s look at a couple of items of interest. Most people that own or employ small wind electric systems add a storage component to the systems, usually in the form of storage batteries. This precious energy being generated can also be stored for use at a later date, minimizing the cost of utility-provided electricity and also helping to recoup the initial investment into the system. Section 694.71 in Part VIIII of Article 694 tells us that if this type of storage system is to be utilized, it would need to be installed perNEC480. Should the system generate voltages in excess of 600 volts dc, then it would need to adhere to the requirements inNEC490 and other applicable provisions that would need to be adhered to for installations rated over 600 volts.

Over the Horizon

What are you waiting for?

We have visited the history of one of the oldest renewable and reliable new fuel sources of the twenty-first century and have taken a look at what is happening across the nation currently with regard to our newest old friend. We have seen how theNECcontinues to boldly go where others will not, and how it guides us with installation and inspection requirements to ensure that this new technology will be a viable long-term benefit to quench our growing thirst for electricity that is produced cleanly and affordably.

Will we finally see a time where fossil fuel is no longer king and the sounds of the internal combustion engine are silenced for all time? Will our children’s children see a world where the only sound in the air is that of the air passing through statuesque towers that generate more energy than this nation and our global neighbors can possibly use? This and many other renewable energy producing technologies leave us with the question that we may never answer, at least in our lifetime. So I ask you,What will we see next…blowing in the wind?


Read more by Jonathan Cadd

Tags:  Featured  May-June 2010 

Share |
Permalink | Comments (0)