Let’s say, you are a supplier of an emergency generator or a designer of an emergency distribution system, and your task is to select an emergency generator and main disconnecting means and overcurrent devices that will manually or automatically disconnect the electrical system supplied from the emergency generator.
(1 votes, average: 4.00 out of 5)It is permissible to stub up conduits into a generator enclosure and have exposed conductors inside of the generator enclosure provided that the generator is mounted on a non-combustible surface such as concrete.
(No Ratings Yet)
A former student called me to ask how to size a new generator for a facility. He said the calculated load would be 1200 amps at 277/480 three-phase four-wire. It would be used for supplying power when the normal electrical supply system is interrupted. This would include lighting for general illumination, for life support equipment [...]
(2 votes, average: 3.50 out of 5)
As we saw in part 1 of this series, it is tough to make alternative electric sources economical when you are trying to operate a completely independent system. Usually the only time people install such systems is when the normal electric service is not available. Utilizing alternative energy sources as a supplement to your normal [...]
(1 votes, average: 3.00 out of 5)
In most areas of the country, building construction is booming, and there is a huge need for and use of temporary construction power. As electrical inspectors and installers in the field, we either inspect, install, or otherwise work with these types of installations frequently, if not daily. That being the case, it can be easy [...]
(No Ratings Yet)
When the city of Detroit hosted the biggest sporting event of the year, Super Bowl XL, the Buildings & Safety Engineering Department (B&SED) played a vital role in its safe operation. Super Bowl XL was the catalyst for a major downtown revitalization and the grand finale of several major events for which our department had [...]
(No Ratings Yet)
Emergency systems in buildings or structures can vary in size and complexity. Some basic emergency systems provide illumination of the egress paths through unit equipment connected to local area lighting circuits. Other more complex and multiple function emergency systems provide power not only for lighting for the egress path but for many other essential functions, [...]
(No Ratings Yet)
Grounding separately derived systems is required where the system meets the characteristics of 250.20. This section gives the conditions under which electrical systems are required to be grounded. A system that is grounded has one conductor of the system intentionally grounded. Whether the system is required to be grounded or is grounded by choice, it [...]
(No Ratings Yet)The Canadian Electrical Code, Rule 14-612 Transfer Equipment for Standby Power Systems prohibits the simultaneous connection of two or more power supplies to electrical equipment and facilities. There is an obvious exception. Rule 14-612 does not apply to parallel generation systems covered by Section 84 — Interconnection of Electrical Power Production Sources. Section 84 does [...]
(No Ratings Yet)In this article, we will cover some of Canadian Electrical Code requirements for standby power and transfer switching. The National Building Code specifies the minimum requirements for emergency standby power supplies for different building sizes and classifications, for high-rise residential, commercial, industrial and commercial buildings depending upon size height and occupancy. It specifies the minimum [...]
(No Ratings Yet)
IAEI, as the keystone of the electrical industry, is a membership driven, non-profit association promoting electrical safety throughout the industry by providing premier education, certification of inspectors, advocacy, partnerships and expert leadership in Electrical Codes and Standards development.
Bad Behavior has blocked 2662 access attempts in the last 7 days.