Sign In | Register Now Why Register?
|
|
Sign In | Register Now Why Register? |
||
|
|
|||
|
|
|||
|
 IAEI News>Issue Listing>May/June 2001 >Test Your Ground Fault Circuit Interrupter
Most homes built since the 1970s have a GFCI in their kitchen and bathrooms. GFCIs appear similar to standard electrical receptacles, but also have "test" and "reset" buttons. An estimated 400 million ground fault circuit interrupters (GFCIs) have been installed across the country. Their built-in test buttons should be used every month and after electrical storms, according to the National Electrical Safety Foundation (NESF). GFCIs are designed to minimize shock and reduce the chances of electrocution. "GFCIs have probably saved hundreds of lives and prevented thousands of serious injuries," said Walt Biddle, executive director of NESF. "An improperly installed or non-functioning GFCI offers no protection against accidental shock. All these devices must be tested regularly to verify that they are working correctly." To test a GFCI: plug a night light into the outlet; push the "Reset" button; turn on the light; push the "Test" button—the light should go off; push the "Reset" button again. The light should go on. If the light remains on when the reset button is pushed, a qualified electrician should inspect and if necessary, replace the unit. More electrical safety information is available at www.nesf.org or from the National Electrical Safety Foundation at 1300 N. 17th St., Suite 1847, Rosslyn, VA 22209.
|
| ||||||||||||||||||||||||||||||||||||||||
Home
| Join | Advertising | Seminars | Contact
Us | Privacy
Statement | Legal
Notices |
||||||||||||||||||||||||||||||||||||||||||
