Limited-Service Controllers
by members of NEMA
AHJs must realize that if service on the thermal-magnetic circuit breaker is required, loss of fire protection may be prolonged since often the limited-service controller is connected directly to utility power.
Making Changes to the Canadian Electrical Code
by Steve Douglas
The Canadian Electrical Code consists of three parts. This article will focus on Part I amendments and outlines the six steps to a successful code change.
Which Business Retirement Plan Is Right for You?
by Jesse Abercrombie
New tax laws have made it easier to pick a plan that can help you save for retirement and, if necessary, attract and retain quality employees.
Perspectives
on PV: Photovoltaic Power Systems and 2005 NEC 
by John Wiles
Article 690 has some changes that will benefit the Photovoltaic (PV) Power Industry and electrical inspectors by making the Code easier to understand and by allowing modified installation procedures.
Being an IAEI Appointee to a Canadian Electrical Code Subcommittee (pdf download)
by Steve Douglas
Every IAEI member has an opportunity to participate in development of the Canadian Electrical Code. A very effective way is through the subcommittees.
Risk Management, Measuring Benefit, and Costs of Safety
by Robert Cormier
Risk management programs must be flexible enough to respond to trends and new technology but firm enough to ensure the public safety system addresses unacceptable risks.
AHJ’s Wanted
by Deborah R. Prince
Additional participation by AHJs will further improve what UL believes is a value added system of standards development.
Emergency Systems and the Witness Test
by Michael Johnston
This article addresses inspection hot spots and will concentrate on inspections of emergency systems and, specifically, the witness test.
New Requirements for Selective Coordination
by Tim Crnko
This is an overview of the requirements for overcurrent protective devices in the 2005 NEC, what selective coordination means, the rationale for the new requirements, system requirements to comply, and the role of designers, contractors and inspectors.
Inspection Basics for Electrical Signs and Outline Lighting
by Michael J. Johnston
The primary objective of this article is to raise the level of awareness of inspectors and emphasize the importance of electrical inspections of electric signs and outline lighting systems. |
